Product Details
| material | semi metallic ceramic carbon fiber |
| MOQ | 100 sets |
| Packing | Color box and carton |
| Car fitment | For trucks |
| sample | free |
| certificate | TS16949 |
| Place of origin | Zhejiang China |
| Brand | VOLKED |
Install Method of brake pad
Brake pad installation, the first brake pad should distinguish between inside and outside, the friction surface of the brake pad should be to the brake disc, so that the disc is suitable, good attachment, fastening clamp body, before fastening clamp body, use special tools to push the plug on the clamp back, in order to install the clamp in place, the tire should be reset after the installation of the brake. When installing tire screws, they should be fastened diagonally to protect the tire and brake hub.Product Features
. Low Noise/Noise Free: mature technology with good stopping power, little harm to brake disc; . Excellent Braking Performance: 0.36-0.48(≤350°) friction coefficient, steady friction coefficient offering excellent friction performance and braking power; .Good Heat Fading: less than 20% in general, smooth braking for safe driving, proper hardness and strength, long lasting working life; . Superior Recovery and less abrasion: less than 0.32 in general, nice resistance to fade and wear; .Competitiveness: modern administration, low cost, competitive prices, assured quality with R&D center/team; After-sales service: warranty period :2 yearsMaintenance
1, avoid the sudden brake:Emergency braking damage to the brake pad is very large, usually when driving, we should pay attention to slow braking, or use the way to brake, so that the wear of the brake pad is relatively small. 2. Reduce braking frequency: Usually when driving to develop the good habit of reducing braking, that is, you can let the engine brake to reduce the speed, and then use the brake to further slow down or stop, driving can reduce gear to achieve deceleration. 3.Position the wheel regularly:When the vehicle has problems such as running off, it is necessary to do four-wheel positioning for the vehicle in time, so as not to damage the vehicle tires and lead to excessive wear of the brake pads on one side of the vehicle. 4.after the replacement of brake pads, pay attention to running in:When the vehicle to replace the new brake pad, be sure to step on a few brakes, to eliminate the brake pad and brake disc gap. In addition, the new brake pads need to be running for 200 km to achieve the best braking effect, so caution should be taken when just replacing them.