High pressure low power solenoid valve JXVKD U85206452 for dust collector

Solenoid valve is used to control the direction of the fluid automation components, belong to the actuator; Usually used for mechanical control and industrial valves, to control the direction of the medium, so as to achieve the control of the valve switch.

Products Details

Product Details

warranty

1year

MOQ

100 sets

Packing

Color box  and carton

application

For industry

sample

free

color

customize

Place of origin

Zhejiang China

Brand

JXVKD

Cautions

1. Select the appropriate solenoid valve according to its application environment, and cannot mix them. For example, if you want to work in a highly corrosive environment, you must choose a corrosion-resistant solenoid valve; for example, if the fluid flowing through is relatively viscous, you must choose a high-viscosity solenoid valve. In short, the solenoid valve should be correctly selected before use. 2. The solenoid valve must be installed correctly. When installing, pay special attention to the arrow on the valve body, which should be consistent with the flow direction of the medium, and no reverse pressure difference is allowed in the pipeline.

Feature

1. The press-in sealing rubber is more durable than the sling type sealing rubber and has a longer duty cycle (filling and unloading air work duty cycle) 2. The discharge method at the bottom of the valve takes away the heating to cool the valve and prolong the service life. 3. At 85Ω higher resistance value, the amplifier and power consumption is really smaller, keeping the overall system cost and heating lower, saving energy. Of course the performance cost is better. Install Method of solenoid value 1. Turn off the air source and remove the hose. 2. Place the wire, solenoid valve, pagoda head, and clamp (for hose, not for aluminum-plastic pipe) in order. 3. Install and connect the wire, solenoid valve, pagoda head and clamp (for hose, not for aluminum-plastic pipe) in turn. Be sure to tighten the screws. In order to prevent gas leakage, the pagoda head and both ends of the wire need to be wrapped with raw tape several times before connecting. 4. Turn on the air source and apply soapy water to the pipe joints to check if there are any bubbles. If so, turn off the gas source and redo. 5. Connect the solenoid valve connecting line and the gas alarm.

Product Display

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours