Product Details
| material | NBR, FKM, SILICONE, EPDM,SBR,SR,CR, HNBR,etc. |
| MOQ | 100 sets |
| Packing | Color box and carton |
| application | Suitable for all industries (motors, crankshafts, gearboxes, screw compressors, etc.) |
| sample | free |
| color | customize |
| Place of origin | Zhejiang China |
| Brand | VOLKED |
Install Method of oil seal
When installing, please place the oil seal horizontally on the cavity hole for uniform pressure. Avoid the oil seal is forced into the tilt state, resulting in damage or stuck parts of the oil seal, resulting in oil seal leakage. If there is no press or press cannot be used on site, please use special fixture to avoid direct hammering with hammer, otherwise there will be deformation and other consequences. When installing oil seal, please use special fixture to avoid oil seal tilt.Product Features
Good oil and fuel resistance High tensile strength Low swelling in water After-sales service: warranty period :2 yearsCautions
If the shaft diameter surface roughness is low or there are rust spots, rust, burr and other defects, to use fine emery cloth or whetstone polished smooth; Apply cleaning oil or lubricating grease to the corresponding position of oil seal lip or shaft diameter. The outer ring of the oil seal is coated with sealant, and the key slot on the shaft is wrapped with hard paper to avoid scratching the lip of the oil seal. The oil seal is rotated and pressed inward with special tools, and must not be hard hit and hard rushed to prevent the deformation of the oil seal or the failure of the spring; If there is lip flanging, spring off and oil seal askew must be removed and re-loaded. It should be noted that when the shaft diameter is not worn and the oil seal spring is enough, do not tighten the inner spring without authorization.When the oil seal applied to machinery is in bad working conditions, large temperature difference in the environment, much dust, and frequent vibration of the machine parts, the stress condition is constantly changing, it should be checked, maintained and maintained frequently.